Britax, Graco

Britax Emblem Vs Graco Extend2Fit

The Britax Emblem Vs Graco Extend2Fit car seats are ideal for parents who want to use one seat from day one. These seats are convertible with a decent weight and height capacity to fit newborns and toddlers until they move to the booster model. They are pretty easy to install and affordable but have some noticeable differences. If parents consider the two, let’s see what they can offer below.

In this comparison, we are going to talk about:

  • When to Use Seatbelts for Children
  • What are Britax Emblem and Graco Extend2Fit
  • How is the Design of Britax Emblem and Graco Extend2Fit
  • How to Install Britax Emblem and Graco Extend2Fit
  • How are the Fits of Britax Emblem and Graco Extend2Fit
  • How are the Performances of Britax Emblem and Graco Extend2Fit
  • Britax Emblem Vs Graco Extend2Fit

Children’s Safety with Seatbelt

Many of us are traveling using private vehicles because they are convenient and often safer for both parents and the kids. But, the standard safety feature in a car is not ideal for children or babies due to the small body size. Parents need a children’s car seat to provide the proper safety for their kids, and chances are you will need at least one seat before each kid is ready to use a seatbelt only. When the kid is about 4 feet 9 inches, they will be ready for the seatbelt.

Children’s bodies grow at different rates, and sometimes they can be taller or smaller than their siblings or same-age friends. Age is not the proper way to decide when they can use seatbelts but the height of their body. Usually, they will reach 4 feet and 9 inches tall when touching 8 to 12 years old, while most children will not fit in a seatbelt until they are 10 to 12 years old. Children also have to use the lap and shoulder seatbelt for the best protection, and anyone younger than 13 years should ride in the back seat.

Parents have to check the fit of the seatbelt before deciding to remove the kid from their booster seat. The shoulder part of the belt must lie across the middle of the kid’s chest and shoulder or not on the neck and throat. The lap belt has to be on their upper thighs and laying low or snug, not on the stomach. The kid must be able to sit against the seatback with their knees bent over the edge without slouching. They have to stay in this position throughout the trip.

 Britax EmblemGraco Extend2Fit
Product Dimensions19 x 18.25 x 29.5 inches
22.1 x 19.2 x 25.2 inches
Shipping Weight19.5 pounds
19 pounds
Shop now at AmazonCheck priceCheck price

About Britax Emblem and Graco Extend2Fit

The proper usage of car safety features can minimize injury and reduce the risk of severe ones. The child’s body is not fully developed yet, so they are more prone to injuries, especially babies and young children. It is the responsibility of their parents to provide the mandatory safety gear. Children’s car seats are usually affordable and accessible for many people. Parents can also choose a 4-in-1 solution like Graco Grows4Me Vs Graco 4Ever DLX to keep the seat for as long as possible.

A 4-in-1 solution is the most convenient but consider the expiration date because it will also reduce the period of use. Suppose parents choose to use different seats as a booster later. In that case, convertible models like Britax Emblem and Graco Extend2Fit will be useful from day one until they are around the age to enter or in elementary school. These models are convertible models meaning we can put them facing the rear for babies or toddlers and front-facing when they grow taller.

Convertible car seats are usually straightforward, depending on the installation system. The Britax Emblem and Graco Extend2Fit have the same price range, with Emblem being slightly more expensive. We find these seats relatively easy to install but not the most straightforward systems we have seen in convertible models. The low anchors’ installation is slightly better on the Extend2Fit seat, but it has a less convenient seatbelt installation.

Another noticeable difference that makes us prefer the Emblem is its rear weight limit. A rear-facing mode is generally safer than a front-facing, so it is wise to keep the children in this mode for as long as possible. The Emblem has a rear weight limit of 50 pounds, while the Extend2Fit is 10 pounds lower.

Britax Emblem and Graco Extend2Fit Design

In general, the shape of most convertible car seats is similar, including the Britax Emblem and Graco Extend2Fit. The frame has a slight difference that makes the side panels look different, but the seat is one part. The base and backrest are one, and they are non-separable. The fabric or padding is removable from the seat’s frame for installation, belt adjusting, and maintenance. Parents can wash the padding when needed or wipe the plastic components. Both seats also have removable infant inserts.

The weight of these car seats is decent and pretty light at 18 and 18.5 pounds. The width at their widest part is 18.5 inches and 20 inches, around the middle of the seat or cup holder for Extend2Fit. Another main difference in the design part is the padding because Extend2Fit has a thicker foam, especially the infant insert, which can either improve the fit or get in the way, depending on the passenger’s body. The Emblem is good for seven years and Extend2Fit for ten years from the manufacturing date.

Britax Emblem and Graco Extend2Fit Installation

Now is for the installation process, which is relatively easy if you choose the low anchor model. Both Britax Emblem and Graco Extend2Fit can use low anchors or seatbelts depending on the weight limit. If your car has low anchors, we highly recommend this installation process as it is the most convenient, especially for Emblem. Unlike many seats, the anchor straps are out of the seat, so we don’t need to open the padding. Remove the connector, place it rear-facing, click to the vehicle, and fasten the strap.

The Extend2Fit also has a similar system, but the belt goes into the seat. The first steps are identical, removing the LATCH connector from its storage and attaching them to the vehicle in a rear-facing recline position. The hardest part is fastening the strap because we need to open the side of the seat cover, right on the fastener side, and pull it through the routing path towards the inside of the seat. But, if you choose the seatbelt installation, it will be easier on the Extend2Fit.

With Emblem, parents have to open the harness to access the seat’s base where the belt path is. The belt path has a lock-off system, so the strap has to go through it and be removed from excess loose before we can close the lock-off. The process of opening the seat padding makes this installation method more time-consuming. The installation steps are similar to Extend2Fit, but it has no lock-off feature, so the process is more straightforward.

Britax Emblem and Graco Extend2Fit Fit

Fitting is also a crucial part when buying a car seat. Most convertible seats say they can fit newborns from 4-5 pounds but not every seat performs well for smaller babies. Thankfully the Britax Emblem and Graco Extend2Fit are ideal even for preemies at around 17 inches long. The fit is excellent, and the lowest strap can hug their body snuggly. The infant insert is necessary for preemies or tiny babies, but if your little one is older or bigger, we can remove it to achieve a better fit.

Toddlers will have no issue fitting into these car seats because they still have plenty of space to grow in rear or front-facing mode. The rear-facing mode is up to 40 pounds in Extend2Fit, while 50 pounds in Emblem. The kid should stay in the rear-facing mode until they exceed the weight limit or up to one inch below the highest headrest. The forward-facing method can secure children up to 65 pounds and 49 inches tall for both seats.

What’s surprising is that Extend2Fit has a higher height capacity due to the higher adjustable headrest. Emblem starts to cramp around for children around 38 inches tall, while a 46 inches tall passenger can sit comfortably in Extend2Fit with rear-facing mode. High chance the kid will exceed the weight limit first before touching the tip of its highest height adjustment.

Britax Emblem and Graco Extend2Fit Performance 

Lastly, we want to mention the performance of Britax Emblem and Graco Extend2Fit. Children’s seat is to help restrain the body when there is an impact on the vehicle and reduce the energy transfer to the passenger. Safety tests for car seats usually use a dummy with sensors to measure the effect that happens on passengers and determine its quality. All seats in the US have to meet or surpass FMVSS 213, and Extend2Fit works slightly better at reducing energy transfer both on the head and chest.

Britax Emblem Vs Graco Extend2Fit

These seats are perfect for parents with newborn babies, and they will last for quite some time, depending on how fast the little one grows. The installation process is similar, but we prefer using LATCH for Emblem and Seatbelt for Extend2Fit. Remember that LATCH has a weight limit, so apparently, we will use the seat belt in the future. The fit is similar, but we find Extend2Fit has a higher height capacity in rear-facing while the weight limit is lower than Emblem. As for safety, Extend2Fit also works slightly better at reducing impact transfer.

- Easy installation: Push button Latch connectors and built in lock offs make car seat installation a breeze
- No rethreading, ever: Quick adjust 10 position harness (8.5 to 17.5 inches) with headrest grows along with your child
- Easy clean up: Remove the car seat cover without removing the harness.Shoulder width:13 inch
- Designed for safety: 2 Layers of side impact protection, steel frame, impact absorbing base, and forward movement reducing v-shaped tether
- Convertible car seat grows with your child from rear-facing harness (4-50 pounds) to forward-facing harness (22-65 pounds)
- Made of Steel reinforced: Product dimensions – 20.75” D x 19” W x 24.5” H; Product weight – 19.25 pounds
- Up to 50 pounds rear facing, allowing your child to safely ride rear-facing longer.Do not use bleach
- Graco ProtectPlus Engineered: Simply safe adjust no-rethread headrest and harness adjust together


Both seats are a great choice, and they are affordable. The installation process is relatively easy, whether with LATCH or a seatbelt. We recommend Extend2Fit because the fit range allows your kid to sit in rear-facing mode for longer, especially if they are lean but quickly grow taller.

Leave a Reply

Your email address will not be published.