Graco Extend2Fit vs Safety 1st Grow and Go are two convertible car seats that are very popular in the market now. Many people love these models because Graco Extend2Fit and Safety 1st Grow and Go can be used continuously for a long time. So, between these two models, which one is better? Read the comparison below to find the answer!
Continue reading below to find out more about:
– The size and weight of each car seat here
– The available colors on each model
– The suitable uses and height/weight limits of each model
– The installation of Graco Extend2Fit vs Safety 1st Grow and Go
– The comparison of their seat features and safety
– Which model that is generally more recommended for the money
Size and Weight
Let’s begin by comparing the dimensions of Graco Extend2Fit and Safety 1st Grow and Go. When choosing a car seat, you need to check the overall size of the product in order to ensure that it can fit inside your car. Also, a compact and lightweight model is usually easier to set up than a bulky, heavy model. See also: Graco Extend2Fit vs Chicco NextFit.
You also need to carefully evaluate the dimensions of the car seat as well as the total width in your car if you are planning to use three car seats in the same row. Some models like Graco Extend2Fit vs Safety 1st Grow and Go are too wide for this set-up; you can use two car seats simultaneously, but fitting three units in the same row will be quite challenging.
Graco Extend2Fit measures 21 inches x 26 inches x 27 inches. Compared to its competitor here, it is indeed larger and bulkier. Hence, it may be a bit more difficult to set up, especially if your car is rather small. In addition, the weight is about 23.7 lbs, so it is fairly heavy. It is not recommended for portable use or traveling.
Safety 1st Grow and Go measures 19 inches x 24 inches x 24 inches. Although this model is slimmer and more compact, it still won’t allow you to fit three units at once in the same row – unless your car is quite spacious. The weight of this model is about 18.7 lbs. It is relatively more lightweight. It is more suitable for a fixed installation, but it is still pretty portable should you need it for traveling.
Some people don’t care about the colors of their car seats, but most parents prefer certain colors that suit their children. Also, it is definitely great if your car seat matches the look of your car’s interior. So, we should include the available color options when comparing Graco Extend2Fit vs Safety 1st Grow and Go.
Graco Extend2Fit is great in terms of variety. There are 8 different color options here. You can choose the variant that suits your preference best. The color options include:
– Ion (black and dark gray)
– Binx (black with white lines)
– Gotham (black and medium gray with white lines)
– Davis (dark gray)
– Hayden (medium gray)
– Spire (light gray and some light blue parts)
– Solar (black with red lines)
– Kenzie (black with pink lines)
Safety 1st Grow and Go provides even more options when it comes to variety. You can choose whichever variant that you think looks best. There are 10 different color options here. The color options are:
– Night Horizon (gray)
– Harvest Moon (black and dark gray)
– Boulevard (black and medium gray)
– Carbon Ink (black and light gray)
– Port Royal (black, dark gray, and blue)
– Blue Coral (black and blue)
– Aqua Pop (black, gray, and light blue)
– Sea Green (gray with some light blue parts)
– Everest Pink (black, gray, and pink)
– Lindy (gray with pink lines)
Even though Graco Extend2Fit vs Safety 1st Grow and Go are both marketed as convertible car seats, note that they have different built-in modes. Graco Extend2Fit has two modes; it can be used as a rear-facing car seat and a front-facing car seat. Safety 1st Grow and Go has three modes, which are rear-facing car seat, front-facing car seat, and belt-positioning booster.
Graco Extend2Fit has a distinctive advantage in the rear-facing position. In this mode, it can hold a maximum weight of 50 lbs.The experts recommend using a rear-facing car seat for as long as possible because this is the safest position. Just keep in mind that the head of the child should be at least one inch below the top of the headrest – but that should allow you to continue using the rear-facing mode for a fairly long time.
Once your child has become big and heavy enough, you can convert Graco Extend2Fit into a forward-facing car seat. This mode is recommended for a child between 22 lbs – 65 lbs. The maximum height limit is 49 inches, and the highest harness slot position is 17.5 inches. So, you can use this car seat since your child’s infancy until they reach the end of the toddler age.
Safety 1st Grow and Go comes with three built-in modes which should allow you to continue using the same car seat until your child no longer needs one. First of all, it can be used in a rear-facing position, which is suitable for a newborn baby until they reach 40 pounds. However, note that Safety 1st Grow and Go’s maximum weight limit in this position is lower than that of Graco Extend2Fit.
Second, Safety 1st Grow and Go can convert into a forward-facing car seat with a user weight range of 22 lbs – 65 lbs and a user height range of 29 inches – 49 inches. The company recommends a minimum age of two years old. However, the highest harness slot position is only 16.75 inches. Third, Safety 1st Grow and Go can also convert into a belt-positioning booster, which is suitable for a child of up to 100 lbs and 57 inches.
One of the most highlighted features of Graco Extend2Fit is the InRight LATCH installation system. This is a simple yet reliable mechanism that works with the LATCH connectors. Some people don’t like the LATCH connectors because they are sometimes hard to tighten, but the connectors on Graco Extend2Fit are so easy and straightforward. A level indicator helps you determine whether the angle of the seat is right or not. Also, the installation is solid without much wiggling around.
If you have an old vehicle which doesn’t have the LATCH connectors, you don’t need to worry. You can also install Graco Extend2Fit by using your car’s seat belt. The seat belt installation is also fairly easy and simple.
On the other hand, Safety 1st Grow and Go comes with standard hook-style LATCH connectors. It has two lower latch connectors and one upper latch connector. You need to attach them all for a secure installation. Overall, the installation isn’t as quick and practical as Graco Extend2Fit’s InRight LATCH, but it is still solid and secure. It can remain in place without much wiggling around.
Also, you are allowed to use your car’s seat belt for the installation, so Safety 1st Grow and Go is also compatible with older vehicles that lack the LATCH connectors. According to the users, the seat belt installation is also good and solid.
Harness System and Seat
Graco Extend2Fit has a reclining seat with 6 recline positions. So, you can adjust the seat for a newborn baby or infant. The visual indicator is very clear; it helps you determine whether the seat is in the right angle that is suitable for your child. In addition, there is a 4-position extendable leg panel, which can promote the support and comfort for your child, and two cup holders.
Graco Extend2Fit also has an excellent harness system. Unlike traditional models which require manual re-threading, this car seat comes with the company’s Simply Safe Adjust Harness System, which enables you to adjust the headrest and harness in one motion. It has 10 harness positions to suit your child’s physicality or your child grows.
The safety and build quality are great. Graco Extend2Fit has a highly durable steel frame and very thick impact-absorbing foam pads. It has excellent side impact protection. It has been tested rigorously to pass the government standards.
Safety 1st Grow and Go also has a reclining seat, but there are just 3 recline positions. Still, it is suitable for a newborn baby or infant. It also has two cup holders. The QuickFit Harness allows you to adjust the headrest and harness position easily in one motion, and there are harness holders to allow the child to get in and out easily. Safety 1st Grow and Go has also been tested to pass multiple safety standards.
Graco Extend2Fit vs Safety 1st Grow and Go
Both models have their own distinctive benefits. However, Graco Extend2Fit is generally more recommended. It can be used in the rear-facing position for a longer time. Also, it has the InRight LATCH installation system, which is easier to use. It has an extendable leg panel to provide better support and comfort for your child.